30 Prompts for B2B Trade Media Pitches
Ashgrove Conveyors has six trade magazines on its launch list for a modular belt system, and last spring one blanket email to all six produced a single reply. The belt cuts a full swap from six hours to forty minutes, which is the one fact most editors will use. The 30 prompts below split the work into five stages: judging the story, researching the outlet, writing the pitch, proving it, and following up. Paste them one at a time and fill the bracketed slots. For the wider campaign around the coverage, see our AI marketing prompts list.
How to Work Through the List
Run prompts 1 to 6 before you write to any editor. Most product launches fail the news test, and finding that out in ten minutes is cheaper than six unanswered emails. Work one magazine at a time from prompt 7 onward and keep every output in one document. The six outlets publish on different cycles, so a two-week stagger is realistic.
The Prompt List
Stage 1: News Judgment and Angles
- Tests whether the belt launch clears the bar for a news item or belongs in a product round-up.
You are the news editor of a monthly bulk-handling magazine. Facts: Ashgrove Conveyors launches a modular belt; a full swap drops from 6 hours to 40 minutes. Verdict: news, product note, or spike. Three reasons each way, then the one missing fact that would change your mind. 150 words. - Generates five angles aimed at five reader jobs, so you can pick one per outlet.
Five pitch angles on the Ashgrove belt, one each for a plant manager, maintenance lead, procurement officer, safety officer and operations director. One sentence each, reader's problem first, product second. No adjectives. Number them. - Pushes a feature claim down to what it means on a real shift.
Fact: a belt swap now takes 40 minutes instead of 6 hours. What a maintenance team does with the recovered 5 hours 20 minutes on a two-shift line. Three concrete uses and one caveat. 120 words. - Turns the downtime number into an annual figure an editor can quote.
Build the downtime arithmetic: two shifts, 250 days, four swaps a year at 6 hours versus 40 minutes. Show assumptions, annual hours saved, annual cost saved at 38 dollars an hour. Five lines, then what the number excludes. - Shows how three different magazines would frame the same launch, so your pitches stop sounding identical.
Describe how three outlets would each frame the Ashgrove belt launch: a maintenance-focused monthly, a logistics operations weekly, and a food-safety title. For each, give the headline they would write, the section it lands in, and the fact they would lead with. Three short blocks. - Runs a kill test before you spend a week on the pitch.
Act as a skeptical editor with 12 years on a conveyor title. List five reasons you would spike a pitch about a faster belt swap. For each reason, name the evidence Ashgrove could supply that would defeat it. If a reason cannot be defeated, say so plainly.
Stage 2: Outlet and Reporter Research
- Builds a one-page profile of an outlet from its masthead and recent issues.
I will paste a masthead and three tables of contents. Build a one-page profile: frequency, circulation, sections, feature length, staff beats, and the two sections most likely to run the Ashgrove story. Use only what I paste, and flag gaps rather than guessing. - Maps recurring sections and picks the slot the story fits.
From this list of sections, rank the top three where a 700-word belt case study would fit. For each: the editor's likely brief, word count, and whether they take contributed copy. Three rows in plain text. - Finds the gap in what an outlet has already published this year.
Here are six headlines this magazine ran in the last 12 months. Identify what they have not covered about belt maintenance, then write two pitches that fill that gap with no overlap. One line of reasoning each. - Extracts an editor’s stated interests from a bio or interview, verbatim.
Read this editor bio and pull out, in their own words, the topics they say they care about. Then list two Ashgrove angles that match and one that clearly does not. Quote the bio line behind each match. Do not paraphrase the quotes. - Scores fit against a submission guideline so you skip outlets that will never run it.
Here is the contributor guideline. Score the Ashgrove belt pitch from 1 to 5 on four criteria: topical fit, format fit, reader benefit, and evidence required. Show the score per criterion with one line of justification, then a total and a go or no-go call. - Writes the reader persona for one outlet so the pitch addresses a person, not a demographic.
Write a 100-word reader persona for a maintenance manager who subscribes to a conveyor trade monthly: what breaks their week, what they are measured on, what they already know about modular belts, and what would make them forward an article to their plant director.
Stage 3: Subject Lines and First Lines
- Produces a dozen subject lines under 48 characters with the hype stripped out.
12 subject lines for a pitch to a maintenance editor about a 40-minute belt swap. Maximum 48 characters. No exclamation marks, no "revolutionary", no question marks. Three types: number-led, tension-led, plain descriptive. Label each. - Writes three opening lines, each grounded in something the editor published.
Three first lines for a pitch. Each references a specific article the editor ran, then links it to the Ashgrove belt in one sentence. No greeting, no "hope you are well", no compliment about the publication. 45 words maximum each. - Trims a subject line to what survives a phone inbox preview.
Take these five subject lines and cut each to 35 characters or fewer without losing the number or the noun. Show original, trimmed, character count. If a line cannot survive the cut, replace it and say why. - Runs a spam and press-release filter over the draft before it sends.
Review this subject line and opening paragraph for phrases that read as a press release or trip spam filters. List each flagged phrase, why it is a problem, and a plain replacement. Leave clean lines alone. - Builds a two-line personal opener from a reporter’s recent byline and beat.
Here is a reporter's recent article summary and beat. Write a two-sentence opener that shows I read the piece, states the one thing it left open, and offers the Ashgrove belt data as the next step. No flattery. 50 words maximum. - Pairs two subject lines and predicts which one that editor opens.
Here are two subject lines for the same pitch. Predict which a maintenance editor opens first, and give the reasoning in three bullets: specificity, relevance to their beat, and effort to read. Then state the one case where the other wins.
Stage 4: Pitch Body and Proof
- Drafts the 120-word body with a fixed five-part shape.
Pitch body of 120 words in this order: news in one line, reader benefit, one proof number, what I can supply, one ask. Subject: modular belt cuts a swap to 40 minutes. No adjectives, no preamble, no company history. - Assembles a proof pack of three numbers, one customer and one admitted limit.
Proof pack: three verifiable numbers, one named customer willing to speak, one honest limitation. For each number, how a journalist could check it. Four short blocks. - Pre-empts the “this is just a belt” objection inside the pitch.
Write two sentences that pre-empt the objection "a belt is a belt, why is this a story" without sounding defensive. Use the retrofit point and the swap-time number. Then give one sentence I should not use, and explain why it weakens the pitch. - Briefs the customer so the quote you offer is usable in print.
Write five questions for a plant manager at a reference site, designed to produce one quotable sentence about the 40-minute swap. Avoid yes-or-no questions. Add a note on what consent the customer must give before I pass their name to a magazine. - Lists the assets an editor needs and the format each should arrive in.
List the assets to offer with the Ashgrove pitch: photos, a spec sheet, a short video, a diagram, and a data table. For each, give the format, dimensions or duration, and one line on why an editor would use it. Exclude anything we cannot supply in 48 hours. - Checks technical claims against the spec sheet before they leave the building.
Compare these pitch claims with the attached spec sheet. Flag any number that is rounded up, any claim the spec does not support, and any unit mismatch. Output two columns in plain text: claim, status. If a claim is unsupported, give the defensible version.
Stage 5: Follow-Ups and the Article Map
- Writes a day-four follow-up that adds information instead of asking again.
Write a 60-word follow-up to a pitch sent four days ago about the Ashgrove belt. It must add one new fact, not repeat the ask. No guilt, no "just bumping this". End with a one-line offer of the spec sheet. - Writes a day-eleven follow-up with a different angle for the same editor.
Write a 70-word second follow-up that leads with a different angle: the retrofit fit across three rival frame brands. Keep the same thread, restate nothing from the first email, and give the editor an easy no. - Closes the loop so the outlet stays warm for the next launch.
Write a 40-word closing note for a pitch that got no reply. Acknowledge the silence once, leave the door open, and name the next thing I will send and when. No apology, no pressure, no request for feedback. - Builds the tracker that keeps six outlets and four follow-ups from colliding.
Design a pitch tracker for six magazines and up to three contacts each. List the columns, the update rule for each, and the one field that predicts a reply. One sample row with plausible Ashgrove data. - Turns an accepted pitch into an outline the editor can approve in one read.
The Ashgrove pitch was accepted as a 700-word case study. Outline it with five section headings, a word budget per section, one number in each, and quote placement. Add what to cut first at 500 words. - Repurposes published coverage for sales without reprinting it.
The article ran. Write a one-page internal brief for sales: what the journalist concluded, two quotes we can repeat with credit, claims we must not repeat, three ways to link the piece. No copying of article text.
A Two-Week Sending Schedule
Six magazines, five working days apart, two pitches per week. Send Tuesday to Thursday morning in the outlet’s time zone and keep the rest of the week for follow-ups on the previous batch. If two outlets share a parent publisher, move one to the following week. Log every send the same day, because the day-four follow-up depends on an accurate date.
Bonus: What Raises Reply Rates
Lead with the number, not the noun. Forty minutes against six hours is the story; the belt is just the object. Give the editor a section, not a story. Naming the slot you fit saves them an internal argument. Send proof before it is requested. One spec sheet on the first email beats three offered later. Stop at three touches. A fourth follow-up costs you the next launch, so use the closing note in prompt 27. For cold trade contacts the subject line matters more than the body, and our email subject prompt picker has more patterns than prompt 13.
Sources & Notes
Ashgrove Conveyors, its belt system, the six-magazine list and the 40-minute figure are fictional examples. Replace them with your own product and outlets. Submission rules vary widely on contributed copy and exclusivity, so read each guideline before promising a story to a second title. Every number should trace back to a spec sheet or customer record, since editors do check.
